Split Hot Water Heat Pump System

Engineered for unrivalled reliability

Our most efficient system Save up to 80%

Our engineers rigorously tested our Split System Heat Pump again and again and again, to ensure it would perform reliably in any climate or environment (household or business), from Victoria to the NT.

**Up to 80% savings on annual hot water bills compared to instant electric.

Neat and nimble

Engineered to fit effortlessly into spaces where room is limited. The separate tank and fan allow for flexible placement, giving you more options to arrange your setup to suit your space.

With this efficient layout, even tight spaces can accommodate a powerful hot water solution with ease and convenience.

A perfect fit

The Split System Heat Pump can be installed in any property type, from inner city apartments to outback ranches. Available in 200L & 300L tank sizes to ensure you can rely on your hot water supply.

you could

save even more

on your install with government rebates

Technically Superior

Sustainable R290 Technology

As well as being extremely energy efficient, due to its exceptional heat transfer properties and a high latent heat of vaporisation, R290 is an entirely natural refrigerant with an extremely low Global Warming Potential, making it the perfect environmentally sound all rounder.

Superior DC technology

DC technology increases efficiency by managing compressor speed and output, to accurately match the heating demand and in-turn, wastes and uses less energy.

Performs at -15°C to +46°C

Designed to perform in Australia’s extreme climate, so you can turn the tap with confidence year round.

Versatile placement

The separate tank and fan allow for flexible placement, allowing more options to arrange for setup, especially if room is limited.

Boost mode

Use the control panel to boost mode and quickly heats water when demand spikes.

Quiet operation

Use the control panel to set silent mode, reducing the system’s sound output while still efficiently heating water.

Costs you and the planet less

Hot water accounts for up to 30% of total energy consumption, which is why our Split System Hot Water Heat Pump has been engineered to efficiently heat your home or commercial property’s hot water for less.

Emerald Heat Pump All in One energy comparison chart graph

*Savings compared to an electric storage system of $1103 annually. Average annual Australian household hot water cost estimates based on daily use of 150L-200L for 4 people in 2023.

Performs at -15°C to +46°C

Designed to perform in Australia’s extreme climate, so you can turn the tap with confidence year round.

Emerald Heat Pump Split System outdoor unit right

Power when you need it

Need hot water in a hurry? Boost mode quickly heats your water, perfect for those unexpected moments when demand spikes.

Peace when you don’t

For those moments when quiet is key, Silent Mode reduces the system’s sound output while still efficiently heating your water.

*Emerald Hot Water Heat Pump Split System control panel is found on the right hand side of the fan unit.

How does a split system hot water heat pump work?

Engineered for…

Planet preserving

Extracts renewable energy from the air.

Built to last

Engineered to prioritise performance and durability.

2 years service, 5 years parts, 7 years tank warranty.

Save up to

0 %

on your hot water bills*

Emerald AC Link and Emerald App in hand_large

Rain or Shine

Performs from
-15°C > +46°C
ambient temperature

…effortless efficiency

Wait it gets better

Because our products are incredibly efficient, many of them are eligible for generous government rebates.

Find out how much you could save in minutes

Check your eligibility in

minutes

In case you missed anything

Emerald’s hot water heat pumps are designed to be highly efficient, saving you up to 74-83% in energy costs compared to standard electric hot water systems. 

Unlike traditional electric systems that use electricity to heat water directly, Emerald hot water heat pumps use electricity to power the compressor and fan, which helps draw in heat from the air to warm the water. This smart design means you get hot water with significantly less electricity, leading to substantial savings on your energy bills.

Emerald hot water heat pump systems are engineered to last. Designed in Australia, our engineers follow stringent testing protocols to ensure quality across our hot water heat pump range. 

The life expectancy of an Emerald hot water heat pump is 10 to 20 years.

Direct sunlight, rainfall and salt spray can make Emerald systems deteriorate faster as they are exposed to the elements. Over time, that can cause the life expectancy to reduce.

Speak to your installer about the best environment for your hot water heat pump. For outdoor installations, we recommend working with your installer to reduce exposure to outdoor elements, a safe spot behind or under protective cover.

In line with Australia’s national goal to save energy, reduce our reliance on natural gas, and cut down on harmful pollutants, the Australian Government has given each state the green light to launch incentive programs that reward for switching to energy efficient solutions, including hot water heat pumps. More on incentive programs and rebates here.

 

At Emerald, our solutions are engineered to align with the Government incentives and rebates.

Each state in Australia has its own set of rules and standards when it comes to these energy saving rewards. So, depending on where you live, you might need to meet specific criteria to take full advantage of these fantastic offers.

To find out if you're eligible for a government incentivised Emerald product, simply use our savings calculator, and a certified installer will review your information, reach out to confirm your eligibility and guide you through the process.

Emerald partners with certified installers to ensure that our products are installed safely and efficiently. While we provide the technology, the installers are independent professionals who handle the installation process. They are also the best place to offer guidance on your individual circumstances for eligibility for government incentives and help ensure you get the most out of your Emerald products.

Only certified professionals are authorised to install Emerald heat pumps and claim the incentives, to ensure compliance with rebate programs and quality standards. We always recommend doing your research to select a trusted installer who meets all certification requirements, ensuring your installation is both efficient and eligible for available incentives.

Head to our find an installer form to hear from one of our trusted installer partners.

As the manufacturer, Emerald engineers high quality hot water heat pumps, but the cost of installation is finalised with your installer. 

The installer will be able to give you an accurate estimate based on your location, what system you’re replacing (or if it’s a new install), and the available government rebate incentives to help lower the cost. Note that only accredited installers are able to apply for government rebate incentives.

Since installation costs vary with factors like system size, location and labour, prices can range, on top of eligibility for government rebate incentive programs, we recommend speaking directly to your installer for a cost on install as there are many elements that could impact the cost.

To ensure you’re maximising any available rebates, only accredited installers can apply for the government incentives. Fill out our find an installer form to connect with one of our partner installers across Australia. They’ll guide you through the process and help determine if you qualify for any government incentives, making the path to efficient hot water even more affordable.

Yes, switching to an Emerald heat pump can save you up to 80% on your hot water bills compared to traditional electric and gas systems. The actual savings depend on your usage and energy rates, but many customers see significant reductions in their energy costs after making the switch.

*Savings compared to an electric storage system of $1103 annually. Average annual Australian household hot water estimates based on daily use of 150L-200L for 4 people in 2023.

Head to our savings calculator, to see how much you could save.

Both Emerald All-In-One and split system hot water heat pump were engineered for efficiency.  

The main difference between Emerald’s All-In-One and Split System Heat Pumps lies in their design, installation and Emerald App integration. 

The All-In-One hot water heat pump is a compact unit where both the water tank and heating components are integrated, making it ideal for smaller spaces and straightforward installation. It has a sleek, minimalist design in our recognisable square shape. The All-In-One also benefits from having built in Wi-Fi, which enables you to connect your All-In-One to your smart phone to manage and monitor your hot water system from anywhere. anytime.

Emerald Split System hot water heat pump has separate units, which allows for greater flexibility in placement. The tank can be placed both indoor and outdoor, and the fan only outdoor.  This can be beneficial for larger homes or properties with narrow space. The split systems control panel is built into the outdoor fan unit, allowing for system control.  

Both options offer energy efficiency, but the choice depends on your space requirements, installation and control preferences.

Your hot water heat pump system must be installed by a professional installer. 

Emerald partners with certified installers to ensure that our products are installed safely and efficiently. While we provide the technology, the installers are independent professionals who handle the installation process. They also offer guidance on product eligibility for government incentives and help ensure you get the most out of your Emerald products.

Only certified professionals are authorised to install Emerald heat pumps AND claim the rebates, to ensure compliance with rebate programs and quality standards. We always recommend doing your research to select a trusted installer who meets all certification requirements, ensuring your installation is both efficient and eligible for available incentives.

Head to our find an installer form to hear from one of our trusted installer partners.

Emerald is proudly Australian. Founded, owned and operated from Sydney’s Northern Beaches, we are committed to innovating solutions and creating technology that costs you and the planet less.  Read more about Emerald here.

Our Head Quarters are located in Sydney, Frenchs Forest, where our team of over thirty product specialists and engineers design, sell and market our products. 

Emerald collaborates with Australian government and partners with specialists internationally to ensure our solutions are made to the highest quality standards at an affordable price point. Our solutions are engineered to cost you and the planet less.

Scroll to Top
Name(Required)